Data sheet for this card can be found here: _IEI_TECHNOLOGY_IVC268GR20The IVC-268G-R20 uses a Techwell TW6802 chip, installation is similar to the KesCom PG104,To use this capture card you need to compile the driver. For Ubuntu Server 12.04.04 LTS with 3.13 kernel the source can be found at $ sudo apt-get install git$ sudo apt-get install build-essential$ mkdir techwell$ cd techwellSEE NOTE BELOW$ git clone git://gitorious.org/tw68/smokeyjoness-tw68-v2.git$ cd smokeyjoness-tw68-v2$ make$ sudo make install$ sudo modprobe tw68(Note smokeyjoness-tw68-v2 was successfully installed on 64bit Server, for 32bit server (same hardware) smokeyjoness-tw68-v2 did not work so I use git clone git://gitorious.org/tw68/pocek-tw68-v2.git)After compiling and "loading" the tw68 modules, you need to check that the modules are actually loaded (lsmod grep tw). You should have the similar output:
techwell tw6802 dvr card driver
Download File: https://shoxet.com/2vKB9Y
2ff7e9595c
Comentários